30 Tons -100 Tons of Refined Palm Oil

Quick details

Fineness: brand new

Usage: Palm oil

Automatic level: Automatic

Production capacity: 30 tons -100 tons

Voltage: according to customer requirements

Power (W) : according to item

Dimensions (L * W * H) : according to the project

The product description

1. Introduction of oil refining palm oil

What kind of palm oil refineries can we offer?

1. Intermittent palm oil refineries: 1-30 tons per 24 hours.

2. Semi-continuous refinery crude: 20-50 tons per 24 hours.

3. Continuous refinery crude oil: 30-600 tons per 24 hours.

What kind of crude vegetable oil can be refined?

Crude soybean oil, palm oil, palm kernel oil, sunflower oil, low erucic acid rapeseed oil (rapeseed oil), peanut oil, sesame oil, cottonseed oil, etc.

2. Main steps for refining palm oil

Hydration degumming and alkali refining deacidification

The crude oil is output by the oil supply pump from the tank and then enters the crude oil heat exchanger to recover the metered hot part, which is then heated to the desired temperature by the heater.After this, the oil and gas mixture (M401) is mixed in the metering phosphoric or citrate phosphate tank and then into the regulating tank (R401) so that the non-hydrated phospholipids in the oil change enter the hydrated phospholipids.

The amount of alkali and the concentration of the alkali solution depend on the quality of the crude oil.Through a heater, the neutralized oil is heated to a temperature (90 ° C) suitable for centrifugation to remove phospholipids, free fatty acids and other impurities in the crude oil.

The oil is then fed into the washing process.

drift

Under normal conditions, there are pigments in the crude oil, we need to use reactive clay to absorb the pigments away, after 20 minutes, we use a vibrating filter to filter the waste white soil on the way.If you want a lighter oil, you'll need to add more active clay.That is to say, on average, the customer can give him a request to control the color of the oil.The process is carried out under vacuum conditions.

Go to the smelly

Usually, there is some smell in the crude oil, which affects the quality of the cooking oil.As for the refinement of our process, we usually use steam to remove the odors directly into a vacuum.

Generally speaking there is about 0.5% water in the alkali refining, in the deodorant pot, the temperature is very high, it can also complete the dehydration part.

filter

This process can remove a small amount of degummed oil that shakes off soluble impurities in the glue, the oil is dehydrated and cooled (60 ° C), and then filtered to ensure the oily quality of the product.The oil is then pumped into the tank.

3, improve the function of the main components of palm oil

(1) Refining part: used for P-acid degumming, alkali refining deacidification and water flushing.

(2) Decolorization part: used to clean up the pigment, bleach oil and oil dehydration.

(3) deodorization part: in the removal of oil from odor components.

(4) dewaxing: used to remove the wax in the oil, in order to obtain high quality oil.

(5) Heat conduction oil furnace supplies the heat energy needed for the production of each equipment, and the temperature reaches more than 280ºC.

(6) Steam engine: production of steam for ordering and distillation needs.

(7) Vacuum pump: the supply needs to be dehydrated, colorless, odor vacuum.The vacuum can reach the above 755mm Hg.

(8) according to the filter element: filter clay, screen out transparent oil.

(9) Air compressor: blow dry the bleached soil, and blow the remaining oil in the filter press.